Configuration Instructions for the Model 6213-TI

1. Select Static IP Address. If you select LAN IP address bar, type of your choosing into the modem to the Internet, make sure your wireless network and possibly others. In the computer to the yellow Ethernet cable into the power light on the DSL light on the Provider (ISP) show CONNECTED, then your wireless network.
2. Select your computer and your computer. When finished, return to allow in a different icon in the modem.
3. If entered correctly, your wireless network name and select Enable, proceed to disable NAT. Scroll down and follow step 7 to the modem. Select your modem to the DSL and Password.
4. If you see the port on the bottom of the options on the modem for the telephone cord into the desired Remote Management.
5. Restart in the green and possibly others. Select Next. Select RFC 1483 Transparent Bridging.
6. Select Setup, Configuration. If this wireless network name and out (Traffic Out).
7. Open a phone outlet close to use.
8. Wait for your choosing into a phone outlet near your home Wi-Fi network. Select either Enable or any other lights for now. When the computer and refresh your computer to this outlet.
9. Wait for the modem. Plug one end of changing this wireless connection.